Here you can see the high clearance winch bumper with raised ends accomidating a 12,000 lb warn.

We replaced the stock sills with these custom 1/4inch thick rocksliders with recovery and jacking points. These bulletproof units have 10, yes ten mounts for the most demanding and rigorous use.

The owner wanted a 12,000lb warn between the frame rails. This winch is very large and an extremely tight fit requring a custom winch bumper with an offset fairlead. No problem.

In order to protect the solenoids from the elements, we mounted the control pack in the seatbox accessable through this weatherproof hatch.

Here you can see the hatch open and the plug in for the winch remote inside.

Here you can see the flush mounted fairlead we inlayed in the bumper as well as the custom 3/4" shackle mounts.